Write a Review

Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base

This 94 BCD 5-bolt ring will serve all your Vintage crankset and Surly OD crankset needs. - Fits any 94 BCD 5-bolt crankset (modification may be needed) - Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - Four of the holes are threaded and one is a normal through bolt hole (done for Surly compatibility). Use a stock 10mm chainring bolt for the fifth, hidden arm. - These rings fit any 94 BCD 5 bolt crankset (possible alterations needed to fit some crankarms) - For Plus size bike applications with the Surly OD crankset, e.g. Instigator and Krampus, you will need to use the stock spacers (Spacer Kit QBP Part number CR8609) that came with your 1x setup. You will also need some 16mm bolts which can be purchased from Problem Solvers. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Provides a great chainline on most boost bikes. - Chainline (approximate as BB centering and cranksets vary) DROP-STOP A Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. Recommendations If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 28t/37g | 30/48g | 32t/57g - Material: 7075-T6 aluminum - Made in the USA

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BB30 for SRAM DUB Road comes in two versions; one using our CeramicSpeed Standard Bearings and the other using our Coated Bearings for even longer lifetime and lower friction. Compatible with: - Frame: BB30 - Opening diameter: 42mm - Shell width: 68mm - Bottom Bracket Tool for installation: BBT-79 In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker Sheet

Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S700 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S700

If performance is all that matters to you, we have a skinsuit we'd like to sell ya. But for the rest of us, there's value in matching performance with comfort, and when you do, you get something like our RBX Classic jersey. It's made from our VaporRize knit fabrics that place a focus on balancing durability and moisture management, which means that you get a jersey that'll be long-lasting and quite comfortable over the long haul. Adding to the comfort, you'll find that we included a full-length front zipper for on-the-fly venting, as well as our just-loose-enough Regular Fit. This cut hits the sweet spot between race and classic, so it's perfect for long, all-out rides, yet it's roomy enough to avoid any pinching or the feeling of being constricted in your movements. - Fabric Content: 100% Polyester - Full-length front zipper gives you the power to manage ventilation under hard efforts or chilly descents. - Lightweight, soft knit fabric is soft against the skin and supportive in all the right places. - Regular Fit is generous, so it fits close to the body without being constricting. - Three standard pockets provide ample space to securely house all of your ride essentials and electronics. - UPF 30+ rating protects your skin from harmful ultraviolet rays.

Ruthless Progression This totally redesigned P.Series gives riders of all sizes a jumping off point to a life on bikes. The lightweight, but tough alloy frame is designed to take all the hits and keep rolling—across all frame and wheel size options. Our approach to these robust bikes centers around delivering a simple, high-quality platform that's versatile for all riders, and packs in category-first features that make a difference to the rider. Starting with the durable lightweight alloy frame, the new P.Series stands up to the demands of dirt jump progression. Its cables are internally routed, adding to its sleek presence and tangle-free riding. • Lightweight, Specialized engineered rigid fork, geo corrected to 80mm of travel makes fork upgrades easy. • 19mm OD handlebars, plus short reach brake levers and grips sized for smaller hands helps young riders stay in control. • Specialized Kicker tires find grip anywhere, street, dirt, or at the skatepark.

We’ve taken many of the features found in our most sophisticated bibs and combined them in this value-packed short, including comfortable raw-edge bib straps for a seamless feel. It’s cut from a fabric made with recycled nylon yarns, and we’ve used the material’s natural stretch to reduce seams and increase comfort while simultaneously creating a stellar fit for even the most dynamic riding. To ensure comfort, it includes our highly breathable, stretchable, SELECT Escape 1:1 chamois. - SELECT Transfer fabric made with recycled Nylon - Reduced paneling and seams, plus raw-edge bib straps, enhance comfort - SELECT Escape 1:1 Chamois provides optimal moisture transfer and breathability - BioViz reflective elements for low-light visibility - 10.5” inseam length (size M) - Form fit - Main Body: 80% recycled nylon, 20% elastane - Bib: 75% nylon, 25% elastane - Made in China

- Frame: 6061-T6 hydro-formed Aluminium, TA, rack/fender mounts, stealth dropper ready, Shimano EP8 mid-engine mount - Fork: Seido MGV full carbon, TA, 1.1/2'' - 1.1/8'', fender / triple cage mounts, 180 mm max rotor size, lowrider rack Compatible, internal hub dynamo cable routing - Levers: Shimano GRX ST-RX810 hydraulic - Shifter: Shimano GRX ST-RX810-LA 1 x 11, spare shifter for dropper actuation - Brakes: Shimano GRX BR-RX810 flat mount hydraulic disc brakes - Crankset: Shimano EP8 FC-EM900 hollow forged aluminium crank - Bottom Bracket: - - Cassette: Shimano Deore XT CS-M8000, 11-speed, 11 - 42 T - Rear derailleur: Shimano GRX RD-RX812, clutch - Hubs: Seido Tau sealed hub, 11-speed, steel axle, centerlock disc - Rims: Seido Magnon i25 heavy-duty asymmetric, tubeless ready, 32h - Tires: WTB Venture TCS Light / Fast Rolling S 650B x 47C / M - XL 700C x 50C, tubeless ready

- The everyday tire for smooth, fast riding on hard packed terrain - Inspired by racing technology - Tread pattern inherited from the MICHELIN Force Racing tires to ensure smooth and fast riding

The new Tarmac is designed to go fast, there's no ifs, ands, or buts about that—but it represents so much more than just aerodynamic prowess. With a lightweight, Rider-First Engineered™ frame, it delivers the best possible ride characteristics, no matter the size. So no matter what you have planned for your new Tarmac, it's ready to help you achieve your goals—PRs, KOMs, or podium top-steps. One bike to rule them all. With the new Shimano 105 Di2 12-speed group to bring electronic shifting to the masses, along with some fast rolling tires in the Turbo Pro 700x26mm tires, this new Tarmac delivers performance at a more palatable price point. - While aerodynamics was paramount to the Tarmac’s development, and to the development of all of our race bikes, weight was the co-pilot on this optimal race bike journey. Previously “aero bikes" always compromised in the weight department—the more drag you reduced, the more weight you gained. With the new Tarmac, our design philosophy was to keep it at, or below, the UCI weight limit out of the box, with no sacrifices to aerodynamics. With the help of the FreeFoil Shape Library, tools like isotopic FEA analysis, and some engineering wizardry by the best engineers in the industry, we delivered a FACT 9r frame that weighs a mere 1010 grams, without giving up a gram of aero, stiffness, or ride quality. - Continuing our quest to develop the perfect race bike, we used our Rider-First Engineered™ philosophy to ensure that the new Tarmac is the most balanced, best-handling Tarmac yet—no matter the size. With an army of the world’s best test riders from our three World Tour Teams — Boels-Dolmans, Deceuninck-Quick-Step, and Bora-Hansgrohe — we made changes to the Tarmac based on their thousands of kilometers on the road. We balanced the ride quality between the front and rear end, so even the longest days in the saddle continue to be comfortable—all without giving up anything to the Tarmac’s legendary handling and race-winning snappiness. - Building on the learnings from the Venge, the new Tarmac utilizes simple integration to create a clean, fast cockpit that’s easy to live with. We’ve improved the routing for any configuration — mechanical shifting, traditional stems, round bars, etc. — all while keeping its aerodynamic attributes. These same traits also make the new Tarmac easy to work on and easy to travel with. It’s a win-win.

High-octane cable systems for today's brake and drivetrain systems. - Features RapidWire compressionless technology and Jet-Lube housing - Rapidwire brake housing boosts braking performance on the road, linear-pull, and mechanical disc brake applications - Sets include cable and housing for front and rear brake applications. - Dual-ended cables with road and MTB options - Made in Japan

These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1

Slash 9.9 X0 AXS T-Type is a top-tier carbon enduro mountain bike ready to rip through anything. It's built with an OCLV Mountain Carbon frame and 170mm high-pivot suspension for gobbling up boulders and keeping traction on-point for wall rides and punchy climbs. A 29-inch front and 27.5-inch rear wheel keep handling playful, and an upgraded RockShox suspension package holds up to anything you can throw at it. Plus, SRAM's wireless X0 AXS transmission shifts with precision, even under load. - Its high-pivot suspension gives you insane control for hairy descents, while carefully tuned anti-squat and oversized pulleys make pedaling astonishingly efficient - The long, 170mm/170mm front and rear travel is more than enough for stomping big jumps and cleaning rock gardens - OCLV Mountain Carbon frame and wheels keep your ride light, stiff in all the right places, and smooth and quiet through the chunder - It comes ready to roll with a mixed wheel setup that gives you a fast-rolling 29-inch front hoop and a stiff, yet nimble 27.5-inch rear wheel, and it can be set up as a 29er for more speed - You can tweak Slash for how and where you ride with Mino Link, adjustable leverage rate, and add an adjustable-angle headset (not included)

- 3mm thick protective layer - The archetypal high quality touring tire - E-Bike Ready. You can choose every Marathon for your E-Bike (E-25). The main sizes are approved and tested for E-bikes up to 50 km/h (E-50).

If you're going to wear a helmet on your Electra, wear an Electra on your helmet. - Durable ABS hardshell for protection and EPS foam liner for security - Detachable visor for when you want sun protection, velcro for when you don't - Fit retention system provides secure and snug fit - Easy to use magnetic Fidlock buckle - Size SMALL fits circumference 48cm - 54cm and hat sizes 6 1/2 - 6 3/4 - Size MEDIUM fits circumference 55cm - 58cm and hat sizes 6 7/8 - 7 1/4 - Size LARGE fits circumference 59cm - 61cm and hat sizes 7 3/8 - 7 5/8 - Small size generally fits children while medium and large sizes fit adults

The Almanzo is the ideal tire for gravel and adventure riders seeking more control than the Strada Bianca and lower resistance than the Gravel Grinder. The Tubeless Tubular version, with 260TPI SuperPoly casing, offers a unique combination of tubeless and tubular construction that's more secure on the rim and more comfortable at lower air pressures, fast rolling, and compatible with both tubeless sealants and tubeless tire plugs. This tire includes PPS Ganzo + PPS2, a lightweight and supple Puncture Protection System, and a high mileage, grippy, natural SMARTplus tread compound. The Presta valve includes a removable core.

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

Whether your goal is to escape on gravel back roads, far from cars and crowds, or drop the hammer at the front of your favorite gravel race, no bike does it better than the new Diverge. It's quite simply the fastest, most capable, and just maybe the most fun bike we've ever made, delivering a ride that's quick and lively under power but stable and confidence-inspiring when the terrain gets rough. From Future Shock 2.0 and all-new gravel geometry to internal storage and category-leading tire clearance, the new Diverge represents everything we've learned over more than 40 years of riding road, gravel, and dirt. The Diverge writes an entirely new chapter in the gravel bike category, so you can dream up entirely new rides. It's the ultimate getaway vehicle. With a FACT 9r carbon frame and Future Shock 2.0, the Diverge Expert will have you riding faster and more confidently over more terrain than you ever imagined possible. SRAM's wireless Rival eTap AXS 12-speed groupset delivers quick, crisp shifting, and Roval Terra Carbon wheels mated to Pathfinder Pro 42mm tires ensure performance across smooth pavement, dirt roads, and gravel tracks. A Roval Terra seat post keeps the Diverge Expert perfectly balanced for the ultimate ride. - Nothing unlocks a bike's capability like tire clearance, so we gave the new Diverge a whopping 47mm of tire clearance with a 700c wheel and 2.1 with a 650B wheel. Thanks to a drive-side chainstay utilizing a solid beam of carbon behind the chainrings we've created clearance without using a fragile dropped chainstay design or increasing chainstay length. - Speed, control, and confidence - Future Shock 2.0 is the ultimate technology for the gravel rider. With 20mm of axial compliance and a hydraulic damper, Future Shock 2.0 suspends the rider, not the bike. This keeps you confident, in control, and able to keep the power down and stay off the brakes over rough dirt roads and in thick loose gravel, all while keeping your hands, arms, and neck fresh. Since Future Shock 2.0's damper is adjustable, you'll be ready for the rough stuff and efficient on smooth pavement. - The more capable your bike, the bigger your rides get, so Diverge borrows SWAT internal storage from the legendary Stumpy. The SWAT door lets you utilize space in the down tube to store tools, a flat kit, nutrition, and even our SWAT Jacket. It keeps weight off your body, low in the bike for better handling, and makes you more self-sufficient, so get out there. SWAT's got your back. - We tossed gravel geometry status-quo out the window. The new Diverge has the most progressive geometry we've ever created for a drop-bar bike, giving riders a capable and stable bike in the dirt that still feels responsive and nimble on the road. We've increased the frame's reach and introduced a slacker head tube and a longer-offset fork. All this creates incredible confidence with a planted feeling in the dirt, while spec'ing shorter stems keep the overall cockpit length the same and the steering lively. We've kept the bike's BB low to increase stability, but high enough to utilize with 650B wheels, if that's your jam. - We've given the Diverge plenty of rack mounts, including fork and top tube mounts, to ensure you can take what you need, no matter how far you plan to go or how long you plan to stay out. - With a FACT 9r carbon frame, the Diverge Expert frame is incredibly capable and race-bike light. Pin it for your local dirt climb KOM, or grind up a giant backcountry peak—the light and lively Diverge will get you there faster.

Built to withstand the rigors of every day shop use, the PRS-3.3 is the stand of choice for professional mechanics around the world. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use. The PRS-3.3-2 features our 100-3D Micro-Adjust Clamp with narrow clamping jaws and a dual-stage, cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size. - Maximum weight capacity: 120 lbs. (54 kg) - Clamp capacity: 0.875" to 3" (22–76 mm) diameter tubes, including aero tubes - Clamp jaws are nominally 2.75" (70 mm) wide - Clamp height: adjustable from 50" to 62" (128–158 cm) - Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector - Can be installed onto the #130 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)

More performance, less impact. Hit the trail and relax in comfort post-ride with the Evoke Women's Mountain Short. Built with a durable two-way stretch shell and removable padded liner, this short is perfect for all of your on- and off-bike adventures. Details: - An eco-conscious women's padded bike short packed with ultra-versatile features for the trail and beyond. - A woven two-way stretch outer-short moves with your body - Removable padded liner adds versatility for going from trail to town - A lightweight chamois wicks moisture and provides excellent breathability - A dual-sided hook-and-loop waist closure lets you easily fine-tune your fit - A vented leg opening moves with your pedal stroke - A zippered right back pocket offers secure storage - This product saves the equivalent of 17 PET plastic water bottles - A semi-fitted cut follows the curves of your body and leaves room for movement

With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)

Climb to new heights, roam farther, and ride harder in the Foray Mountain Shoe. This undeniably comfortable off-road cycling shoe features a BOA L6 dial for a superior fit on rides of any length and intensity. No matter where or how you ride, this shoe delivers thanks to a stiff sole with a durable upper featuring the added protection of GnarGuard. - inForm Race last offers a slightly roomier, high-performance fit - A single BOA L6 dial for precision fit and easy micro-adjustments - Strong, synthetic perforated upper materials hold up to off-road rider demands - Durable GnarGuard rubberized coating protects against abrasions and other damage from trail debris - Nylon composite Bronze Series sole provides stiff yet walkable performance - Stiffness index: 6 of 14 - Tachyon rubber outsole allows great grip on any surface - Compatible with 2-bolt SPD-style cleats

Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton. - Finish: Black Ano - Weight: 120g (100mm) - Rise: +/- 7-deg - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 70mm, 80mm, 90mm, 100mm, 120mm - Materials: EA90 alloy - Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

When ripping singletrack on a hot day, you need shorts that can not only take a beating but keep you cool and comfortable. Cue the Trail Air Shorts. - 13.5" inseam (size 34 waist) fall low around the knee for a roomy fit that leaves plenty of room for pads. - Bonded pocket bag with zipper opening provides a convenient, secure space to store your trail essentials. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Does not include a liner. - Fabric Content: MAIN BODY: 86% Polyester, 14% Spandex; OTHER: 82% Nylon, 18% Spandex - Front buckle adjustment system ensures that the fit of the shorts is easily customizable and dialed-in, even when your pockets are loaded. - Laser-perforated venting adds sophisticated points of ventilation that don't detract from the durability or performance of the shorts. - VaporRize woven fabrics are treated to be water-repellant while remaining durable, stretchy, and lightweight for peace of mind on the trail.

The Cult half link chain features teflon coating engraved with cult logos and is designed to help dial in the rear end length on frames with short dropouts. - Rounded side plates are compatible with 8T and larger drivers - Color: Black - Width: 1/2 x 1/8 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes

The perfect pair of bib shorts don't feel like bib shorts—they don't feel like you're wearing anything at all. And from here on out, you'll wish all of the bib shorts you race in would disappear beneath you like the new SL bib shorts. You wanted top-shelf, and you got it. This unmatched comfort comes, in part, from our custom, pre-molded 3D Chamois. Not only is it pre-molded to the shape of your body and saddle to reduce wrinkles and pressure points, but it also features multi-density foam that ensures the utmost in comfort. The other half of the comfort equation comes from the fabrics and the fit. For example, the welded uppers get rid of seams altogether for the most comfortable straps possible, while an articulated design ensures the perfect fit when in the riding position. - Four-way stretch fabric provides ample comfort and a soft hand. - Welded bib upper construction reduces friction and dials-in the fit by reducing the need for seams. The bib upper fabric, meanwhile, incorporates a carbon yarn for anti-microbial and thermal regulation properties. - Silicone-infused fabric cuff provides a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. - Articulated design ensures the perfect fit while in the riding position. - Reflective elements increase your visibility to motorists in low-light conditions. - UPF 50+ rating protects your skin from harmful ultraviolet rays. - Triple-density-foam Performance Body Geometry Contour 3D Chamois is pre-molded to match the shape of the body for exceptional comfort.

Nothing Is Off-Limits To The Embolden, A Trail Bike Designed To Conquer Tricky Climbs, Rowdy Descents, And Chunky Rock Gardens With Confidence. Key Performance Factors: - Custom Frame Design Women's custom-designed geometry paired with 27.5 or 29-inch wheel size gives the rider the best fit and bike handling. - Trail Capability ALUXX-Grade Aluminum frame, tubeless wheelset, dropper seatpost, Liv Sylvia trail saddle, and a 1x drivetrain allow you to tackle new technical terrain with confidence. - Flexpoint Suspension The 120mm of FlexPoint Suspension provides an effective, lightweight, and durable suspension system so you have increased control while riding over rooty and rocky terrain. Techs and Features: - ALUXX Aluminum Technology This Performance level frame material features 6061 alloys with single-butted tubes to produce strong, lightweight framesets for a variety of different bikes and riding styles. - Overdrive Designed to provide precise front-end steering performance, this fork steerer tube technology uses oversized headset bearings (1 1/4” lower and 1 1/8” upper for road, 1 1/2” lower and 1 1/8” upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness. - Powercore A massively oversized bottom-bracket/chainstay area features a fully integrated, 86-millimeter wide bottom-bracket design (92-millimeter wide for off-road bikes). Asymmetric chainstays provide additional stiffness on the driveside and stability on the non-driveside. -Tubeless System Engineered with proprietary Dynamic Balanced Lacing technology, this tubeless-ready composite WheelSystem delivers superior efficiency, pinpoint control, and comfort. Wheel size: Sizes X-Small – Small: 27.5-inch Sizes Small – Large: 29-inch

Oury single compound grips. Simple & classic. - Soft grips with raised blocks