Write a Review

Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. - Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap - Includes 2x sets of anodized to match bottle cage bolts

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

The Bluegrass Solid D3O® knee pads are enhanced with D3O® shells and extra soft pads at the sides to enhance protection and comfort. Built for the hardest lines, we used breathable and durable fabrics, such as Air Mesh and Kevlar, for the construction. - D3O® Technology - Protectors compliant with EN 1621-1, Level 1 - Side soft pads - Extended sleeve - Silicone grippers - Top and bottom straps - Zip closure - Strong, durable Kevlar fabric

Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head

Aerodynamic design. Genuine replacement parts Original equipment integrated seatpost. Aerodynamic design. - Color matched for direct compatibility - 7mm round and 10mm oval saddle rail clamp ears sold separately

The direct mount chainrings for SRAM cranksets with the 3-bolt mounting interface. They replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in the Drop-Stop B tooth profile, which is optimized for SRAM Flattop chain. It is also compatible with all other 9-, 10-, 11-, and 12-speed chains except the Shimano 12-speed chain. Compatibility: - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that these chainrings are NOT compatible with SRAM 8-bolt direct mount cranksets. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - There is one offset: Standard Road/CX/Gravel: 6mm offset for cyclocross and road crank applications with 47mm chainline - Praxis Works Road/CX cranks use the 6mm offset. - If using a 9-speed drivetrain, use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP B - Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC - Not compatible with 12spd Shimano HG+ chains Recommendations - - Recommend the use of a clutch style rear derailleur for the best chain security. - An L-wrench works best since the crank spindle may contact a socket adapter and prevent it from engaging properly. - Use the same 3 bolts to attach the Wolf Tooth ring or we carry replacement bolts Tech Specs: - Weights: 38T/90g | 40T/106g | 42T/111g - Material: 7075-T6 aluminum - Made in the USA

- Closed cell neoprene prevents the penetration of wind and elements - Stretchability allows a snug but comfortable fit without slipping or itching - Fits under hats or helmets seam situated in back

After years of research and development dedicated to perfecting the 35mm bore handlebar, DEITY has created the best-feeling carbon line of handlebars to date. Gone are the days of blown-out hands and varying degrees of arm pump after a day on your new 35mm bore oversized super-stiff handlebar. Our all-new Skywire Carbon Trail handlebar delivers the same level of strength and comfort you've come to expect from DEITY with a very specific focus on increased performance and time on the bike. Perfectly spec'd at 800mm wide with 15mm and 25mm rise options, this beauty promises to keep you on the bike longer with a shorter recovery between rides. - Oversized 35mm Bore Carbon Handlebar - Designed for Enduro / All Mountain / Trail - Developed and designed exclusively with our own in house DEITY molds - Unidirectional Carbon Construction - Damping properties reduce hand fatigue - 800mm Width - 9 degree bend x 5 degree upsweep - The ultimate combination of strength, weight, and ride quality - Textured non slip stem clamping surface - Textured grip ends for added bite - Covered by our Lifetime Crash Replacement Policy to the original owner - Recommended MAX Torque Spec range (4 - 4.5 Nm) - 15mm rise: 222 grams - 25mm rise: 226 grams

Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool Frame and Fork Taps cut easily and fit conventional tap handles.

Rims: WTB HTZ i30 29" - ETRTO 622-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hub: Shimano FH-MT400-B (Boost, HG) - 12x148mm (Axle not included) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

Gel padded all-rounder that delivers all-day comfort. - High stretch backhand - Palmistry technology with gel padding - Finger tabs for easy glove removal - Silicone palm print for grip - Velcro adjuster strap for a secure fit - Terry sweat wipe

Our Trail Shorts are an essential for any trail rider's wardrobe. They're lightweight, durable, and downright comfortable—everything you need for an afternoon shred. - 11.5" inseam (size MD) fall low around the knee for a roomy fit that leaves plenty of room for pads. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Does not include a liner. - Fabric Content: 100% Polyester - Front fly and button closure. - One zippered pocket and one hand pocket provide convenient, secure space to store your trail essentials. - Side waist adjustment tabs ensure that the fit of the shorts is easily customizable and dialed-in, even when your pockets are loaded. - VaporRize woven fabrics are durable, stretchy, and lightweight for peace of mind on the trail.

The Network helmet is the perfect blend of style, versatility and performance. Cyclists will welcome the clean, modern design combined with the superior protection and ventilation properties that only Koroyd can provide. Koroyd is featured in strategic, zonal impact areas offering increased protection where it matters most. As eyewear integration is mandatory for this rider, the AirEvac system works to pull air off of your eyewear to prevent fogging. Pass-through channels allow eyewear to be easily stored on the front of the helmet. - Lightweight Aerocore in-mold construction - Ventilated protection featuring patented Koroyd material - MIPS system available in all colors - VaporFit adjustable fit system - 20 optimized vents - XT2 anti-bacterial performance lining - Ultra-light single layer webbing - AirEvac ventilation - Camera and light mount compatible - Ultimate sunglass integration - Adjustable/removable visor - Weight (Size M) 10.58oz / 300 grams - Certification: CPSC, CE EN 1078 Sizing - Small: 51 – 55cm - Medium: 55 – 59cm – Large: 59 – 62cm

An eco-conscious bike jersey that offers versatile performance with comfortable materials in a fitted cut. The best all-around jersey When you need one jersey that does it all, reach for the Circuit Cycling Jersey. It's built with lightweight and breathable fabrics, enhanced by 37.5 technology, which uses body heat to evaporate moisture and keep you cool, dry, and at the ideal core body temperature. Plus, it's packed with all of the other things that make a great cycling jersey, like three back pockets, full-length YKK zipper, and a raw edge sleeve for a seamless transition from jersey to skin. - An eco-conscious bike jersey that offers versatile performance with comfortable materials in a fitted cut. - STANDARD 100 by OEKO-TEX tested - 37.5 active-particle technology keeps your body at an ideal core temperature - Raw edge sleeve with silicone gripper for a comfortable and stay-put fit - Three open back pockets plus additional inset card pocket - Drop-tail design with silicone gripper covers your backside in riding positions for a cycling-specific fit - Full-length YKK zipper with recycled tape allows ventilation on long climbs or warm days - UV protection 50+ - Fitted cut provides a streamlined body fit for enhanced performance Made with love for you and the planet The Circuit Jersey is a bluesign product that's been STANDARD 100 tested by OEKO-TEX. 37.5 Technology Circuit uses 37.5 Technology to accelerate sweat evaporation and keep you cool, dry, and at the ideal core body temperature: 37.5° Celsius. Sleeves that stay Raw-cut sleeves with silicone-printed grippers provide a comfortable fit that stays put. Extended rear coverage A drop-tail design provides backside coverage and features silicone-printed grippers for added security. Essential storage Three open back pockets provide plenty of room to store your ride necessities. UV50+ Circuit fabrics are built to help you shine while reducing your exposure risk by offering UV50+ protection. How to care for your jersey Caring for your jersey will prolong its life, keep you fresh, and help eliminate odors to keep your ride partners happy. Wash in cold water on a gentle cycle and hang to dry.

The Bluegrass Prizma 3D gloves are designed specifically to add extra impact protection against the obstacles that are in your way. The 3D TPR prisms defend the knuckles and the top of the hand. Thanks to their ergonomic shape and refined internal seam construction you will keep your handlebars tight without distractions. - Four-way-stretch durable mesh on the upper construction - Slim-fit neoprene cuff ensures maximum durability and comfort - Adjustable strap wrist closure with silicon gripper leaves you with an individual fit - Silicon wrist gripper keeps it secure - 3D TPR prisms protect the knuckles and the top of the hand - Soft-touch covered thumbs to clean dirt and sweat from the face and eye-wear - Hollow overlay on thumbs maximizes durability and avoids long-ride blisters - Thumbnail reinforcement - Fade-resistant sublimated graphics for a modern look - Breathable perforated palm to improve ventilation and comfort - Silicone print on brake fingertips for a grip control - Capacitive seams keep you connected with your touchscreen devices

Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)

PUSH THE PACE ON CLIMBS, LET LOOSE ON THE DESCENTS. THIS ALUMINUM HARDTAIL GIVES YOU A FEEL FOR THE TRAIL WITH BALANCED, CONFIDENT HANDLING AND A PLUSH SUSPENSION FORK. KEY PERFORMANCE FACTORS Proven alloy performance ALUXX aluminum frameset is hand-built in-house by the world leader in aluminum engineering. Balance and stability Frame geometry is designed to optimize the balance and roll-over capabilities of 29-inch wheels or the liveliness of 27.5-inch wheels (depending on frame size). XC control Suspension fork offers either 80mm or 100mm of smooth travel for added XC control. Wheel size: Sizes X-Small – Medium: 27.5-inch Sizes Small – X-Large: 29-inch

- Lyrik and Pike 29+ Solo Air 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead, SA sealhead

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

Pair an irrational appreciation for speed with the unmatched versatility of being able to run a traction-loving 29-inch front wheel and a snappy 27.5-inch rear, and you have the fastest, most capable Demo to date. The Demo Expert adds planted, confident control to the mix with an assist from RockShox’s BoXXer Select 29 fork featuring their DH DebonAir spring and a Super Deluxe Select Coil shock offering external rebound adjustment. Should your riding style or terrain require it, the Demo's adjustable rear end means 29-inch rear wheel compatibility is on deck, ready to deliver. SRAM Code RS four-piston brakes front and rear give you the power to slow down with almost telepathic immediacy, while the Demo Expert’s suspension platform injects just the right amount of anti-rise into the kinematics equation to keep your weight low and centered, maximizing rear-wheel traction when you need it most. - The Demo Expert M5 alloy frame is fully optimized to take advantage of the traction benefits of a 29-inch front wheel and the increased maneuverability of a 27.5-inch rear wheel while maintaining the ability to change your rear wheel size to 29-inch to suit different terrain and riding styles with an adjustable rear end that ensures chainstay length and bottom-bracket height stay dialed no matter the hoop size. - The Rockshox Super Deluxe Select DH coil shock may be heavy on adjectives, but it’s even heavier on performance, offering external low-speed compression and rebound adjustment while the Trunnion mount offers extra bushing overlap for increased durability.

- Valve type: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The all-new Levo delivers the unbelievable power to ride more trails through an unequaled combination of ride quality, usable power, and ride anywhere range. It's the distillation, application, and amplification of a 40-year obsession with creating the world's best riding mountain bikes. Since its introduction, Levo has set the bar every other e-MTB aims for, and the new Levo raises that bar again. It starts with our Turbo Full Power 2.2 motor and Turbo Connect Unit (TCU), which provide Levo with a smooth and seamless amplification of your efforts—4x you power that lets you choose where to ride, and when you want to do it. Levo also shatters limitations when it comes to range, amplifying your effort for up to five hours of trail time. Now you can ride farther, and explore more, than ever before. And the optimized chassis boasts 150mm of custom-tuned rear suspension and adjustable geometry that delivers a stable and natural ride like no other. Because at the end of the day, it's the ride that matters. Believe it. The Turbo Levo pairs our all-new M5 alloy chassis and the smoothest and most powerful motor on the market with the most value-packed drivetrain, suspension, and brake components available. The result is a bike that puts plenty of high-dollar e-MTBs to shame. - Levo's fully integrated Turbo Full Power 2.2 motor, 500Wh battery, and Turbo Connect Unit deliver category-leading 90 Nm of torque and 565 watts of power for up to five hours of ride time, empowering you to ride farther and faster than ever before. - The Levo's Turbo Connect Unit (or "TCU") is more than an "On-Off" button—it's the brains of the bike. The TCU shows your battery level and power-assist mode. It also communicates, via ANT+/Bluetooth, with our optional handlebar display to display even more information about your day's ride. - A dedicated mixed-wheel size design with a 27.5" wheel in the back and 29" upfront delivers a nimble ride that carves circles around other full-power e-MTBs. A generous cockpit centers you on the bike, optimizing traction and corner control. The low bottom bracket, slack headtube angle, and reduced fork offset keep things stable in the rough. - Levo offers two distinct geometry settings, allowing you to easily dial-in its performance for any riding style and any terrain. Bottom bracket height can be fine-tuned up or down by 7mm. - Levo's 150mm of rear travel is supple on small bumps, devours square-edged hits without a twitch, eats massive G-outs for breakfast, yet still offers amazing pedal response and delivers your power to the ground with total efficiency. - The Levo's S-Sizing is based on what matters—rider size and style, not inseam. Six sizes, all with similar headtube lengths and standover, allow you to choose the size that best suits your individual style. Smaller S-Size numbers are going to be nimble and more flickable, while bigger S-Sizes deliver more stability and a roomier ride.

With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)

Light, cool, and awesome looking! The Gravity 4.0 jersey is a premium race jersey, made from ultra-light, stretch mesh fabric that is MoistureCool wicking and has air channels. The tailored race-fit stretch material can be worn with or without body armor and of course, is neck brace ready! The elbows of the jersey are reinforced with Brush Guards, an ultra-thin flex film that is feather-light and increases scratch and abrasion resistance properties. Welded seams at the cuff and hem provide maximum comfort and fit. So just point the bike down the trail and stay loose! Details: - Ultra-light, race-tight fit - Mesh fabric with air channels for superior ventilation - Racing stretch fit for riding with or without body armor - Stain-resistant fabric coating - Brush Guard reinforcement on elbows - Welded seams at cuff and hem for maximum comfort - Collar design for use with or without a neck brace - Two side pockets - Rear reflective detail - Size: Junior #S-XL (120-160cm)

In keeping with its commitment to innovation, Ortlieb has just introduced another PVC-free line of products made of a polyurethane-coated polyester fabric. The base fabric of the products in the Free Line is coated with polyurethane in a manner that ensures lasting waterproof qualities. The result is a waterproof and durable canvas material that is as outstanding as the conventional Ortlieb canvas material when it comes to durability and service life. The PVC-free version of the proven Ortlieb Back-Roller was developed for cyclists and outdoor enthusiasts who would like to avoid PVC entirely. This rear pannier bag with a roll closure offers ultimate practicality for all of your bike tours and weekly grocery-shopping ventures, especially on account of its generous payload. Thanks to its waterproof exterior, easy-to-clean interior and shoulder-bag function, the Back-Roller Free is ideal for all who would like to use their bikes despite having things to carry. With the Quick-Lock2.1 system, the bags attach to any bike rack with a tube diameter of up to 16 mm. Larger hooks (e.g. for e-bikes) are available separately. - Classical rear pannier (pair) with roll closure - Made of PVC-free, PU-laminated polyester fabric - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picnic) - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Easy to clean inside

Your feet deserve the best, and when it comes to socks, there's no better way to treat them than with a pair of our Soft Air Socks. They're constructed from Soft Air Vaporize yarns that transfer moisture like the best in the business. And while this leaves the foot feeling dry and cool, we took things a step further by incorporating a ventilating mesh channel around the toes. - PowerBand mid-foot arch supports the foot and secures the shape and fit where the foot needs it most. - Vented mesh toe channel helps to keep things light and airy within the shoe. - Targeted textured zone under forefoot reduces slip. - Fabric Content: 55% POLYAMIDE–35% POLYESTER–10% ELASTANE

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Schrader Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

Wheel Freehub Kit SRAM XDR for Super 9RB - Compatible only with the Super 9 - Compatible With: WH-SP9-CCR-A1

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED