Accessories

PRO X Freehub Grease, using our MRCC Micro Resistant Complex Compounds, is specifically designed for all freehubs that require a very lightweight grease. Non-pawl freehubs recommend a grease to stay in the mechanisms moving parts. Oils generally are to thin and will move away from moving parts leaving them exposed to wear and malfunction due to lack of lubrication. PRO X Freehub Grease performs in a broad temperature range from the summer heat to the extreme cold temperatures. "Pour Point" of PRO X Freehub Grease is -30F / -34C degrees. PRO X Freehub Grease works exceptional in hubs that share lubrication between the freehub and wheel bearings. Follow the manufacturer's specification for the volume required in your freehub body to experience the superior performance of Dumonde Tech's PRO X Freehub Grease. Our MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Tech Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our Motorsports lubrication, MRCC, is incorporated into our revolutionary PRO X bicycle lubricants. Everyone who has tested or raced using PRO X reports that its performance is significantly better than any other lube they have ever used. Benefits: - Performs in cold conditions. Ideal for Snow Bikes - Reduces resistance - Reduces watts used. - No shipping restrictions, can be sent anywhere in the world by air or ground. - No VOC's.

- Rear basket, steel, mesh - Also fit for carrier racks with raised or lowered front/backside, compatible with many E-bikes carrier racks - Permanent mounting with patented WSL-system, easy assembly, adjustable in width and length (included)

Park's Threadless Star Nut Setter makes it quick and easy to install star-fangled nuts used with 1-inch and 1-1/8-inch threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time. Plus, the unique design virtually eliminates pinched fingers!

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity

High-volume pump holds securely to bike frames and includes stable folding foot for on-the-go inflation ease. The pump with something to prove The Bontrager Mini Charger is a high-volume, frame-mountable bicycle tire pump that includes a long hose for ease and versatility. A practical folding foot stabilizes while you pump, for faster tire inflation. Product details - High-volume frame mount pump - Stable, folding foot for pumping ease - Long hose gives versatility and saves your valve stems

A shop grade floor stand that adjusts to any wheel size. - Extremely adjustable to securely hold any wheel size - Wide base with triangulated arms hold bikes firmly - Easy in-out for practical store use - Dimensions: 22 x 15 x 17" (560 x 380 x 430mm) - Tool-free adjustment with thumb screws - Rubberized feet protect floors

The Rear Top Tube Bag is the perfect add-on to maximize storage on your bike when frame space is limited, all other attachment points have been used or you want to organize tools, spares, food, or other accessories into a separate compartment. A simple zip closure allows for easy one-handed access. Hypalon MOLLE accents on the base and rear of the bag each provide two placements for the double-sided velcro straps, allowing you to tailor the bag to be ideal for your setup. Handmade in our Yorkshire workshop from 100% waterproof textured nylon, with a nylon lining and finished with the classic vegan-friendly PU leather Restrap label. Weight - 65g Capacity - 1L - 100% handmade in Yorkshire, England - Capacity: 61 cu in (1L) - Weight: 70g All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

- The simple tightening of the spindle fits the chain pin with perfect precision and with its ergonomic design it is easy to use.

This front basket system uses a bolt-on handlebar mount to allow for quick and easy removal of the basket itself. - Extended handlebar clamps allow greater clearance for shift and brake cables - Requires 3.5" of handlebar clearance for mount - Fits 7/8" to 31.8mm handlebars - Made in USA - Dimensions: 11.75 x 8 x 9"

The Crombie tool is a game changer when it comes to swapping cassettes. Whether you're a professional mechanic swapping cassettes several times a day or a DIY kind of guy, this gem has a place on your tool bench. The first time a quick release spring rolls under your bench the Crombie tool paid for itself. If you like to remove the cassette for a detailed cleaning or just swapping from one cassette to another, it's a big time saver and a breeze to use. This version of the tool has a Shimano/SRAM remover on one side with a Campagnolo on the other. A precision machined spline ensures maximum engagement and durability. The STANDARD version comes with a solid handle which gives the tool some mass making it the preferred choice in the shop. The SUPER LIGHT version shaves 125 grams out of the handle. SL handles are plenty durable for lockrings that are torqued close to the 40 NM spec. If you commonly come across over torque lockrings get the standard handle!

The Geiszler is a stepped adapter designed to work with every thru-axle fitment currently on the market: 12x142, 12x150, 15x100, 20x110, Lefty and 24 Maverick. The tool will allow precision dishing without removal, a notable time saver when wheel building. The Geiszler can be bolted into the hub with the included stud for serious wheel work. It can also be slipped into place for minor adjustments and retained by the compression of the truing stand. This simple tool eliminates clutter around your truing stand and keeps you from searching for the right adapter. - Made in Bend, Oregon - Bolts and washers for use with single-armed wheel stands are available upon request, for free

GNT ANT+/BLE 2-in-1 Speed & Cadence Sensor Black Product description - ANT+ and Bluetooth low energy compatible speed and cadence sensor - Attaches with included zip-ties to the frame - Includes mounts, sensor, and magnets

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

RockShox simplifies your pack with this HP 2-Stage Air Pump. Throw it in your pack for every ride and you have both a shock and tire pump that boasts a 300psi capacity. The aluminum construction makes it super durable and the head fits both presta and Schrader valves. A large removable gauge is easy to read and the air-release button makes fine tuning pressure in shocks and tires a breeze. And it includes a mounting clip to mount to water bottle bosses.

- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks - Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals

- Trek Reaktiv Thru Shaft 200 hour service kit

- Front Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Low Steady, DayTime PULSE, NightTime Pulse and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 15 hours for front and 7.5 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

The KryptoFlex 1030 Looped Cable is a 10mm braided steel cable providing increased cut resistance. The double loops are for use with U-locks, disc locks and padlocks (sold separately). The vinyl coating protects bikes and equipment from scratches and it includes a Hook-n-Loop strap for easy carrying. The KryptoFlex 1030 Looped Cable is 0.4-inch x 30-feet.

Gear up and go long. Axiom's Journey Suspension & Disc Lowrider Front Rack gives you lots of extra carrying capacity. Designed for bikes equipped with front suspension bike and disc brakes, the Journey Suspension rack installs easily and assures excellent clearance so your load doesn't interfere with your bike's functions. With increased height for improved cornering and ground clearance, the Journey is perfect for going deep into the backcountry. It is made of light, rugged aluminum and handles heavy panniers (sold separately) with ease.

Axiom's Streamliner Road DLX Rack is designed to fit on road bikes that don't have eyelets. It's made of reliable, light aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

- Rubber-coated arms support 2 bikes - Useful shelf for accessories that folds down to save space when not in use - Max. Load: 65lbs.

Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds. - The Wald Training Wheels fit 16- to 26-inch bicycles. - The Wald Training Wheels support riders up to 125 pounds.

Giant's Arc Fenders features a v-shape drainer that helps remove mud and water efficiently so you stay dry. They easily mount with a front and rear quick-release and, with the single-arm stay mount, they're a stylish addition to your bike. Plus, they're made from a super lightweight poly-carbonate material for long-lasting protection from nasty weather.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

200 Hour/1 Year Service Kit - Includes Dust Seals, Foam Rings, O-Ring Seals, Debonair Sealhead - Domain R/Domain RC B1 (2022)

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

- Ergonomically Designed hard urethane construction with a non-marring non-sparking head and Hi-Vis yellow color - Deadblow feature minimizes bounce back and reduces hand fatigue

Between its large screen and easy wireless setup, CatEye's Padrone is great for those who want a simple, squint-free riding computer. It's packed with essential features like speed, distance, and time, plus the auto start/stop means you'll always have an accurate ride time and distance for tracking your progress.

- 7mm four-sided chain links made from 3t manganese steel - Patent-pending end link design secures chain to hardened deadbolt eliminating critical vulnerability - Hardened deadbolt design provides extra holding power - High security disc-style cylinder is pick and drill resistant - Includes 2 new ergonomic “I” keys - Durable weather-resistant nylon sleeve prevents scratches - Key Safe Program - Product dimensions: 47.3” (120cm) chain length - Product weight: 3.75 lbs (1.70 kgs)